Alto Professional APX1000 2x 500 Watt versterker
Productnr.: ALTO-APX1000Heeft u ergens goedkoper gezien? Bel of mail ons voor de beste prijs.
Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo ¹⁄₄” XLR, inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000's level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.
The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.
Power Specifications:
Continuous power (20 Hz – 20 kHz):
Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD), 2 x 500 W at 4 ohms, 2 x 270 W at 8 ohms (1.0% THD EIAJ)
Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
Input Sensitivity: 1.0 V
Input Impedance: 10 K Unbalanced
Frequency Response: (at 10 dB below rated output power), 20 Hz - 25 KHz (+0/-3 dB)
Voltage Gain: 32 dB
Distortion: (SMPTE-1M) <0.5%
S/N Ratio: 110 dB
Protection: On/Off, mute, DC-fault, load
Controls Front: Front Controls: AC power switch, 2 channel level control; –∞ to +30 dB
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / ¼” combo
Output: Touch proof binding posts and Speakon® NL4 connectors
Power Supply: AC Power: 100 VAC, or 110 – 120 VAC or 220 - 240 VAC (50 / 60 Hz)
Weight: 5,49 Kg
Product Omschrijving
The APX1000 delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power-to-weight ratio and performance quality of the APX 1000 means you'll get solid Class D power without breaking your back or your wallet.Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo ¹⁄₄” XLR, inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000's level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.
The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.
Applications
- Live sound systems
- DJ systems
- Touring rigs
- Installations
- Arenas and stadiums
- Houses of worship
Technische Informatie
2-Channel 1000 Watt Power Amplifier
- 1000 Watts at 8 Ω bridged mono
- 2 x 500 Watts at 4 Ω; 2 x 250 Watts at 8 Ω
- Efficient Class D power
- Balanced combo input jacks
- Lightweight, two rack-space design
- Easy to read LED level and clip indicators
- Low pass filter
- Low-noise cooling fans
Power Specifications:
Continuous power (20 Hz – 20 kHz):
Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD), 2 x 500 W at 4 ohms, 2 x 270 W at 8 ohms (1.0% THD EIAJ)
Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
Input Sensitivity: 1.0 V
Input Impedance: 10 K Unbalanced
Frequency Response: (at 10 dB below rated output power), 20 Hz - 25 KHz (+0/-3 dB)
Voltage Gain: 32 dB
Distortion: (SMPTE-1M) <0.5%
S/N Ratio: 110 dB
Protection: On/Off, mute, DC-fault, load
Controls Front: Front Controls: AC power switch, 2 channel level control; –∞ to +30 dB
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / ¼” combo
Output: Touch proof binding posts and Speakon® NL4 connectors
Power Supply: AC Power: 100 VAC, or 110 – 120 VAC or 220 - 240 VAC (50 / 60 Hz)
Weight: 5,49 Kg
Product is op voorraad
Levertijd: +/- 1 dag(en)
Pijs van 311,99 €
259,99 €
Goedkoper gezien? Bel / mail voor de beste prijs.
Prijs is incl. BTW.
Op prijswijzigingen en typ fouten voorbehouden
Prijs is incl. BTW.
Op prijswijzigingen en typ fouten voorbehouden
Mogelijke levermethoden: Reguliere verzending (NL), EXPRESS (VOLGENDE OCHTEND), Afhalen (op afspraak), Bezorging België, Verzekerde verzending (NL), EXPRESS (ZELFDE DAG)
Product aanbevelen
Vraag over product
Accessoires
Product | Opmerking | Status | Prijs | |||
---|---|---|---|---|---|---|
| 16,95 € * | |||||
| Onze Prijs 5,99 € * | |||||
* Goedkoper gezien? Bel of mail ons voor de beste prijs. Toegangsgegevens weergeven Prijzen zijn incl. BTW. Op prijswijzigingen en typ fouten voorbehouden |
Blader door deze categorie: Versterkers
Wij bevelen ook het volgende aan:
* Goedkoper gezien? Bel of mail ons voor de beste prijs.
Prijzen zijn incl. BTW.
Op prijswijzigingen en typ fouten voorbehouden
Prijzen zijn incl. BTW.
Op prijswijzigingen en typ fouten voorbehouden
Alto Professional APX1000 2x 500 Watt versterker
Geen opmerkingen:
Een reactie posten